Speaking of aluminum doors and windows, I believe everyone is familiar with it. Do you know how aluminum doors and windows are made? Today, I will introduce to you the production process of aluminum doors and windows and the advantages of aluminum doors and windows.
1. Tutorial of making aluminum alloy doors and windows
(1) Broken material
Cutting, also known as “cutting”, is the first process and a key process in the production of aluminum alloy doors and windows.
Cutting equipment is mainly used to cut the material. The length of the material should be determined according to the design requirements and with reference to the construction drawings of doors and windows, and the cutting is required to be accurate; otherwise, the squareness of the doors and windows is difficult to guarantee, and the error value of the broken material size should be controlled within 2mm.
Generally speaking, right-angle cutting should be adopted for sliding doors and windows; 45° angle cutting should be adopted for casement doors and windows; other cutting methods should be selected according to the assembly method.
(2) Drilling
The frame fan assembly of aluminum doors and windows generally uses screws. Therefore, whether it is the assembly of horizontal and vertical rods or the fixing of accessories, it is necessary to drill holes in the corresponding positions.
Profile drilling can be done with a small bench drill or a pistol-type electric drill. The former has a worktable, so it can effectively ensure the accuracy of the drilling position; the latter is because of easy operation.
Before drilling, you should locate the elastic line on the profile according to the assembly requirements. The drilling position is required to be accurate and the hole diameter is appropriate. Do not repeatedly change the drilling on the surface of the profile, because once the hole is formed, it is difficult to repair.
(3) Assembly
Connect the profiles with screws according to the requirements of the construction drawings.
There are three ways to assemble aluminum alloy doors and windows: 45° angle butt, right-angle butt and vertical butt. The connection of the horizontal and vertical rods generally uses special connectors or aluminum angles, and then fixes them with screws, bolts or aluminum studs, and the rest is packaged and protected.
2. What are the advantages of aluminum alloy doors and windows
(1) Elegant decorative effect
The surface of aluminum alloy doors and windows has an artificial oxide film and is colored to form a composite film layer. This composite film is not only corrosion-resistant, wear-resistant, has a certain fire resistance, and has a very high gloss. Aluminum alloy doors and windows are light weight, precise and accurate in processing and assembly, so they can be opened and closed easily and without noise.
(2) Good decay and corrosion resistance
Wooden doors and windows and steel doors and windows are prone to peeling, decay or rust in a humid environment, which is far inferior to aluminum alloy doors and windows with good corrosion and corrosion resistance.
(3) Heat preservation
In winter, window frames with thermal insulation strips can reduce 1/3 of the heat lost through the window frame; in summer, if it is air-conditioned, window frames with thermal insulation strips can reduce more Loss of energy.
(4) Protect the environment
Through the application of heat insulation system, energy consumption can be reduced, and the environmental radiation generated by air conditioning and heating can be reduced at the same time.
(5) Good sealing
Compared with ordinary wooden doors and windows and steel doors and windows, aluminum alloy doors and windows are much better in airtightness, water tightness and sound insulation than ordinary doors and windows.
Summary: This is the relevant content about the production process of aluminum doors and windows and the advantages of aluminum doors and windows. I hope this article will be helpful to everyone.
